In order to better identify the lack of the box seat and the blockage of the stub hole, the pogo pin connector is designed with backlight. This design also helps to simplify and reduce the visual system of the quality detector after the injection is completed. Cost: There are two ways to connect the connector: the pin and the injection box seat are individually connected and the multiple pins and the injection box seat are combined.
The manufacturing process of electronic connectors is basically the first stamping and forming of pins, and the production of connectors is even more so; a large high-speed stamping machine is used to stamp thin metal strips into connector pins. Once the pins are stamped, , Proceed to electroplating immediately, and plated with anti-corrosion metal coating. At this stage, if the pins of the pogo pin connector are twisted, chipped, deformed and other quality defects, they will be screened out after entering the electroplating equipment to ensure the quality of the pins and ensure that every customer gets it. The finished connector is safe and reliable.