What kind of connector meets our requirements, we need to choose carefully.
1. We need to think about how many wires we need to connect. What are the specifications of the wiring?
Don't underestimate such a small problem, he decides which kind of suitable rubber core connector we use. In our actual selection process, there are hundreds of rubber cores to choose, how to choose, and our installation space And the voltage requirements have a relationship that cannot be ignored.
2. The function of the same connector is different, how to deal with it.
On the same panel, when four sockets are needed, one of them is carrying high current, and the other is carrying ground current. In this case, if we do not understand, it will destroy our expensive equipment.
How to do? It is to order the same rubber core arrangement with different angles from the standard. If the key positions of these arrangements are different, this will prevent the mismatch of the plug and socket.
3. The type of socket should also be taken into account.
Wall sockets are suitable for penetrating into the wall. Box or panel sockets have the advantage of saving space and are generally used when no accessories are needed.
4. Type of plug.
Usually we use straight plugs, but in special cases, right-angle plugs are used, which means that they enter the device at a right angle.
5. The choice of accessories after the plug.
When choosing a connector, the choice of accessories after the plug, whether it is a straight plug or a right-angle plug, has an integrated or separate tail attachment. The integrated strength is very good, and the separate type can quickly check the solder joints.
Read recommendations:
Charger probeM017 2X4.8pogopin factory Right Angle Pogo Pin factory
Negative contact pin M397 2x6.5pogopin factory mozilla thimble company
Spring probe M414 2.0x8.3 1 pin pogopin factory Data line spring needle Vendor
Four elements to choose antenna spring thimble
Why does the processing accuracy of the pin socket deteriorate?sewing thimble company