1. Quality control in the stamping process
Like any other product manufacturing, the manufacturer's connector manufacturing process usually starts with stamping. With the help of some large-scale high-speed punching machines, the connector can be deformed from the original thin metal to a punched shape. In the production process of the pogo pin connector manufacturer, one end of a large roll of metal tape is sent to the front end of the punching machine, and the other end is passed through the hydraulic punching machine and wound on the reel. This process can ensure that the product has no quality problems, and can also reduce the occurrence of scratches and curls.
2, connector manufacturer plating monitoring
5G RF pogo pin thimble connectors are stamped and usually plated immediately. Strict treatment was carried out during the electroplating process. By ensuring that the pins are not kinked or deformed, the pins can be better sent to the electroplating equipment. The manufacturer of the 5G radio frequency pogo pin thimble connector should ensure that the plating color is normal and uniform, and make corresponding adjustments according to the actual situation.
3. Strict testing standards
is the process of inspecting the quality and performance of the product after the production and processing is completed, and using the inspection results to reasonably adjust and control the connector in time to meet its requirements.
It can be seen that every processing procedure of the pogo pin connector is very important. The 5G radio frequency pogo pin thimble connector is a precision accessory, and hidden dangers cannot be avoided during the processing. Therefore, the pogo pin connector controls the production quality and avoids unnecessary problems.