How to prolong the service life of springs? What are the main methods for maintaining precision springs?
For precision springs, maintenance is required. Routine maintenance can ensure the normal operation of the machine and reduce the failure rate. So today, Chuangda Gaoxin will explain to you what are the maintenance methods of precision springs.
Among them, the maintenance content of the spring machine (computerized spring machine, computerized spring coiling machine) only needs to be cleaning, tightening, adjustment, lubrication, and anti-corrosion. In order to reduce the wear rate of spring mechanical parts, eliminate long-term hidden troubles, and extend the service life of the machinery, Suzhou spring manufacturers need to do the following:
1. Routine maintenance. Routine maintenance focuses on cleaning, tightening, adjustment, and lubrication. Routine maintenance of the spring machine must be carried out as required before departure, during work, and after receiving the car. This task is performed independently by the spring manipulator.
2. Regular maintenance. According to the maintenance requirements of various mechanical equipment, after reaching the specified working hours or specified mileage, corresponding regular maintenance must be carried out, including the following:
Primary maintenance: Primary maintenance is carried out on the basis of routine maintenance. The focus is on lubrication, tightening and checking that all relevant parts have been cleaned and the three filters (air, oil, fuel filter) have been cleaned. Mainly guided by the mechanical team leader and completed by the mechanical operator.
Secondary maintenance: The secondary maintenance mainly focuses on inspection and adjustment. Specifically, check the working conditions of the engine, clutch, transmission, etc. and make necessary adjustments to eliminate the faults found. Ensure that the spring machinery has good working performance. The secondary maintenance is completed by the machine operator assisting the maintenance personnel.
Three-level maintenance: focus on detection, adjustment, and elimination of hidden troubles. It is necessary to diagnose and check the parts that affect the performance, and then complete the necessary replacement, adjustment and troubleshooting.
Also be careful not to hit a large number of springs with overloaded wire diameters, which will not be conducive to the maintenance of the spring machine, and will reduce the life span. This is the same as the young people staying up all night and causing death. Never use a new machine as an experiment to train a novice.