Antenna probe M407 2x5.2 1 pin pogopin factory Magnetic BOGO pin Vendor
1.0 overview
This specification defines the general performance parameters and test requirements of Pogo pin series products.
2.0 Requirements:
2.1 Dimensions
The external dimensions meet the requirements of the product drawings.
2.2 Materials and plating
Body is a brass alloy, and the nickel-plated surface is covered with a gold-plated layer. The thickness of the nickel layer and the gold-plated layer are different for different use occasions, but the nickel layer needs to be greater than 60uin, and the gold plating greater than 4uin.
Plunger is a brass alloy. The nickel-plated surface is covered with a gold-plated layer. The thickness of the nickel layer and the gold-plated layer are different for different applications. However, the nickel layer must be greater than 60uin and the gold plating greater than 16uin.
Spring is stainless steel, or it can be electroplated piano steel wire.
The plastic is high temperature nylon plus 30% glass fiber.
Project details
1. Pogo Pin product specification
1.0 overview
This specification defines the general performance parameters and test requirements of Pogo pin series products.
2.0 Requirements:
2.1 Dimensions
The external dimensions meet the requirements of the product drawings.
2.2 Materials and plating
Body is a brass alloy, and the nickel-plated surface is covered with a gold-plated layer. The thickness of the nickel layer and the gold-plated layer are different for different use occasions, but the nickel layer needs to be greater than 60uin, and the gold plating greater than 4uin.
Plunger is a brass alloy. The nickel-plated surface is covered with a gold-plated layer. The thickness of the nickel layer and the gold-plated layer are different for different applications. However, the nickel layer must be greater than 60uin, and the gold plating greater than 16uin.
Spring is stainless steel, or it can be electroplated piano steel wire.
The plastic is high temperature nylon plus 30% glass fiber.
3.0 parameters
3.1 Continuous working current: less than 2.5A
3.2 Working voltage: less than 36V@25℃
3.3 Service life: more than 10000 times
3.4 Working temperature: -40℃ to +85℃ 90% R.H.Max.
3.5 Storage temperature: -40℃ to +85℃ 90% R.H.Max.
4.0 Electrical performance
4.1 Contact resistance: dynamic contact resistance within the working stroke: less than 30 milliohms
4.2 Insulation resistance: insulation resistance with plastic, for one minute under 500V DC or AC conditions, insulation resistance> 100MΩ
4.3 Withstand voltage: 500 VAC 1 minute, maximum leakage current 0.3mA
5.0 Mechanical properties
5.1 Positive force: working point is greater than 60gf
5.2 Holding power: 0.5kgf/pin
5.3 Durability: 10,000 times the spring force remains within the range
5.4 Vibration resistance: 15 minutes 10～500HZ vibration frequency, 1.2mm amplitude, no more than 1μ sec. Power failure, contact impedance <100mOhm.
6.0 Environmental performance
6.1 Thermal shock: -40℃/30Min. 85℃/30Min. 100 cycles Contact resistance <100 mOhm No
Dongguan City juxiangxin Precision Hardware Co., Ltd. is a legally registered enterprise by the government with a registered capital of 500,000 yuan. Founded in 2010, it is a professional manufacturer of electronic connectors integrating development, production and sales. Its main products include pogo pin series, probe series, all kinds of turning hardware, antenna shrapnel, charger series, metal stamping terminals and other connectors in the communication industry, with more than a thousand kinds of products. The company's products are widely used in household appliances digital, medical equipment, electrical computers, handheld terminals, electronic cigarettes, beauty machine, automotive electronics, Bluetooth, communication electronics, meta-machine and other consumer electronic products.
Currently, there are more than 2,000 kinds of products.! The minimum tolerance can be guaranteed to be 0.0025mm, the minimum cutting diameter can be within 0.3mm-35.0mm, and the maximum cutting length can be within 80mm of copper, iron, stainless steel, aluminum, batch processing of titanium and other metal parts. Currently, there are 10 Japanese "Jinshang" and "STAR" CNC machine, 15 Nomura 1053 automatic lathes, 30 Taiwan Wangzhu 1568 automatic lathes, and 20 Taiwan Mingyang 2025 automatic lathes , there are 6 production lines for product assembly and independent development of production fixtures, which can provide a monthly production capacity of 20 million. There are also testing rooms, ROSH detector, coating thickness tester, impedance tester, current Resistance Tester, life tester, salt spray tester, elasticity tester, CCD full-size detector, and all kinds of production testing and testing equipment, fully guarantee product quality and reliability.